黑龍江不銹鋼雕塑 http://www.liuxiaoyu.com.cn/行業不甘于落后，在用不銹鋼材質，我們的生活中逐漸出現了不銹鋼雕塑。不銹鋼雕塑是現代雕塑最具時尚氣息的雕塑之一，而且越來越常見了，它造型華麗、流暢，為了讓它們永遠熠熠生輝，合理的保養就顯的十分重要，那么我們應該如何保養黑龍江不銹鋼雕塑呢。Heilongjiang stainless steel sculpture industry unwilling to lag behind, in the use of stainless steel materials, stainless steel sculpture gradually appeared in our life. The stainless steel sculpture is one of the most fashionable modern sculpture sculpture, and more and more common, which shape is beautiful and smooth, so that they will forever shine, reasonable maintenance is very important, then we should be how to maintain Heilongjiang stainless steel sculpture.

首先對黑龍江不銹鋼雕塑進行定期、有規律的清潔，清潔時先用中性清潔劑涂抹于雕塑表面，然后再用無絨毛毛巾對雕塑表面拭抹，對面積較大的污漬，則可用手動噴霧槍對其噴噴，然后用干毛巾擦干凈，切記動作要輕柔；同時不銹鋼雕塑需要干燥的環境，有些雕塑需要放在不通風的環境里，而不銹鋼雕塑卻是放在干燥的環境里來對其保護。The first regular, regular cleaning of the Heilongjiang stainless steel sculpture, clean with neutral detergent and then smear on the surface of sculpture, sculpture on the surface without fluffy towel wipe, the larger stains are available on the manual spray gun spray, and then use the dry towel to wipe clean, remember that the action should be gentle; at the same time the stainless steel sculpture need dry environment, some sculptures need to be placed in the ventilation environment, and stainless steel sculpture are placed on the dry environment to its protection.

其次是應防止黑龍江不銹鋼雕塑與汗液進行接觸，有時候人身的一些汗液也會導致不銹鋼雕塑生銹，因此，建議用手拿時最好帶上手套，一是防止不銹鋼雕塑刮傷手背，二是防止汗液導致雕塑生銹腐蝕；還有我們還應對不銹鋼雕塑進行縫隙清潔，對不銹鋼雕塑的縫隙清潔時，最好用棉花球弄濕后再擦，沿著裂縫從頭擦到尾，以防止有所遺漏，切記不可直接用濕毛巾擦拭；接著是不銹鋼雕塑的重污垢清潔，不銹鋼雕塑上的污垢如果太重，先用冷風電吹風吹一下，然后用麥桿刷清潔，最后用軟毛刷收尾，千萬不要用金屬拋光劑以及其他任何溶劑。The second is to make Heilongjiang stainless steel sculpture and prevent sweat contact, some people sweat sometimes can lead to the stainless steel sculpture rust, therefore, recommend the use of hand best to wear gloves when one is to prevent scratching of the stainless steel sculpture, two is to prevent sweat cause rust and corrosion sculpture; we also deal with the stainless steel sculpture gap clean, clean the stainless steel sculpture of the gap, with the best cotton ball wet wipe, wipe from head to tail along the crack, to prevent the omission, try not to directly use a wet towel to wipe; then the heavy dirt clean stainless steel sculpture, stainless steel sculpture on the dirt if it is too heavy, first with cold air dryer look, and then use the brush to clean straw, finally ending with a soft brush, do not use metal polishing agent and other solvents.

最后是對黑龍江不銹鋼雕塑的刮痕修復，對于不銹鋼雕塑上的刮痕，只要不是很嚴重的，可以對其進行拋光修復，另外，平常生活中我們要避免雕塑被刮傷，因為刮痕嚴重的話，就不太好處理了；我們在對不銹鋼雕塑清洗完后，對其抹上一層薄薄的微晶蠟，基本上是一年一次，這樣對于不銹鋼雕塑更加有利。The last is to repair the scratches of Heilongjiang stainless steel sculpture, stainless steel sculpture for the scratch on, as long as it is not very serious, can repair the polishing, in addition, ordinary life, we should avoid the sculpture was scratched, because serious scratches, not so good deal; we are on the stainless steel sculpture after cleaning, to cast a thin layer of microcrystalline wax, basically once a year, so for the stainless steel sculpture is more favorable.

以上就是有關黑龍江不銹鋼雕塑的保養方法，相信大家應該有所了解了吧，希望這次介紹能幫助大家更好的保養不銹鋼雕塑哦。The above is about the maintenance of stainless steel sculpture in Heilongjiang, I believe we should have some understanding of it, I hope this can help you better maintenance of stainless steel sculpture oh.